Series '125WCSI'

Available in sizes 2" to 24" with a body designed to fit between ANSI 125# and 250# flanges for maximum operating pressures as follows:

PMO: (Maximum Operating Pressure)
2" to 6" 400 psi @ 150 deg. F
250 psi @ 400 deg. F.
8" to 12" 200 psi @ 150 deg. F.
150 psi @ 400 deg. F.

Materials of Construction:
  • Body: Cast Iron
  • Plug: Bronze or 316 Stainless Steel
  • Seat: Bronze or 316 Stainless Steel (Optional soft seat available upon request)
  • Spring: 316 Stainless Steel
Notes:
  • These valves are designed for horizontal and vertical flows.
  • The conical spring design allows the plug greater travel, resulting in better flow characteristics than valves of conventional design.
  • These valves can be machined to accept an optional soft seat (usually Buna-N) for bubble tight shut-off.
Unit of Measure

Size

N/A 200 mm8 in

A

N/A 165 mm6 1/2 in

B

N/A 305 mm12 in

C

N/A 213 mm8 3/8 in

D

N/A 219 mm8 5/8 in

Flow Coefficient Cv

N/A 768

Weight

N/A 40.9 kg90 lb
Maximum Operating Pressure PMO1 N/A 150 psi at 400 ºF 200 psi at 150 ºF

ANSI Class

N/A 125 – 125/250 ANSI

End Connection

N/A Wafer type

Valve Type

N/A Silent Check

Seat Material 

N/A Resilient-Buna-N

Body Material (1)

N/A A126-B Cast Iron

Plug Material (2)

N/A B148 C954 Aluminum Bronze or 316 Stainless Steel
Seat Material (3)2 N/A B148 C954 Aluminum Bronze or 316 Stainless Steel

Spring Material (4)

N/A 316 Stainless Steel

Bushing Material (5)

N/A B148 C954 Aluminum Bronze

Set Screw Material (6)

N/A 300 Series Stainless Steel
  • 1 Recommended for liquid service only.
  • 2 Resilient seat materials are available. Please consult factory.