Item Number CC-6, Condensate Cooler - CC Series On Colton Industries

Series 'CC' Condensate Coolers

COLTON condensate coolers offer a unique inlet baffle arrangement designed to enhance flash separation and extend tank life and are usually supplied with a self powered, modulating cooling control, thermometer, internal dispersal manifold and an internal retention weir to save on cooling water. Condensate coolers should be utilized on any application where condensate is being discharged to drain or waste. Most local codes restrict waste water to a 140 deg. F. high limit.

Ordering Information Required:
Pressure of condensate at source steam trap/s or blow down valve/s.
Volume of condensate (usually expressed in lbs/hr.) to be cooled.
Temperature and pressure of cooling water.
High limit of waste condensate (if other than 140 deg. F.)

Unit of Measure

Specifications

A	N/A 6 in
B	N/A 47 in
C	N/A 38 in
D	N/A 24 1/2 in
E	N/A 9 in
F	N/A 19 in
G	N/A 0.50 in
H	N/A 2.50 in
J	N/A 1 1/2 in
K	N/A 1 in
L	N/A 8.8 in
M	N/A 2 1/2 in
N	N/A 8 in
O	N/A 13 in
Weight	N/A 80 lb
Normal Sizing by Condensate Load	N/A up to 2000 lb/hr
Design Pressure	N/A 25 psig
Design Temperature	N/A 100 ºF
M.D.M.T.	N/A -20 ºF
Hydrostatic Test	N/A 40 psig
Design Steam Pressure	N/A 15 psig saturated
Operating Steam Pressure	N/A 0 psig (vented to atmosphere)
Heat Treatments	N/A None
Service	N/A Non-Lethal
Material of Construction	N/A Carbon Steel (Optional Stainless Steel)

Specifications

A

B

C

D

E

F

G

H

J

K

L

M

N

O

Weight

Normal Sizing by Condensate Load

Design Pressure

Design Temperature

M.D.M.T.

Hydrostatic Test

Design Steam Pressure

Operating Steam Pressure

Heat Treatments

Service

Material of Construction