Request Information
Series '125WCSI'

Available in sizes 2" to 24" with a body designed to fit between ANSI 125# and 250# flanges for maximum operating pressures as follows:

PMO: (Maximum Operating Pressure)
2" to 6" 400 psi @ 150 deg. F
250 psi @ 400 deg. F.
8" to 12" 200 psi @ 150 deg. F.
150 psi @ 400 deg. F.

Materials of Construction:
  • Body: Cast Iron
  • Plug: Bronze or 316 Stainless Steel
  • Seat: Bronze or 316 Stainless Steel (Optional soft seat available upon request)
  • Spring: 316 Stainless Steel
Notes:
  • These valves are designed for horizontal and vertical flows.
  • The conical spring design allows the plug greater travel, resulting in better flow characteristics than valves of conventional design.
  • These valves can be machined to accept an optional soft seat (usually Buna-N) for bubble tight shut-off.
Unit of Measure

Size

 N/A 65 mm2 1/2 in

A

 N/A 73 mm2 7/8 in

B

 N/A 127 mm5 in

C

 N/A 70 mm2 3/4 in

D

 N/A 73 mm2 7/8 in

Flow Coefficient Cv

 N/A 87

Weight

 N/A 3.6 kg8 lb
Maximum Operating Pressure PMO1 N/A 250 psi at 400 ºF 400 psi at 150 ºF

ANSI Class

 N/A 125 – 125/250 ANSI

End Connection

 N/A Wafer type

Valve Type

 N/A Silent Check

Seat Material 

 N/A Resilient-Viton

Body Material (1)

 N/A A126-B Cast Iron

Plug Material (2)

 N/A B148 C954 Aluminum Bronze or 316 Stainless Steel
Seat Material (3)2 N/A B148 C954 Aluminum Bronze or 316 Stainless Steel

Spring Material (4)

 N/A 316 Stainless Steel

Bushing Material (5)

 N/A B148 C954 Aluminum Bronze

Set Screw Material (6)

 N/A 300 Series Stainless Steel
  • 1 Recommended for liquid service only.
  • 2 Resilient seat materials are available. Please consult factory.