Series 'AVDT '
Available in sizes from 1/2" npt to 1" npt for operating pressures up to 300 psig liquid service at temperatures up to 338 deg. F. and specific gravities down to 0.95.
For installation at the high points of liquid systems to allow for the venting of air during initial system commissioning and for the removal of entrained gasses during system operation.
AVDT Models are:
Available in sizes from 1/2" npt to 1" npt for operating pressures up to 300 psig liquid service at temperatures up to 338 deg. F. and specific gravities down to 0.95.
For installation at the high points of liquid systems to allow for the venting of air during initial system commissioning and for the removal of entrained gasses during system operation.
AVDT Models are:
- Model AVDT-150: for service pressures up to 150 psig
- Model AVDT-300: for service pressures up to 300 psig
- Body: Cast Iron
- Cover: Cast Iron
- Mechanism: Stainless Steel
- Float: Stainless Steel
- Disc: EPDM
- Gasket: Non Asbestos Fibre
- Cover Bolts: Steel
- The soft EPDM seating allows for bubble tight operation and eliminates the nuisance 'spitting' often associated with metal-to-metal seats.
- The cover is fitted with a 1/2" npt plugged connection. This can be fitted with a full bore ball valve to allow for manual by-pass to decrease start-up time during system filling.
Unit of Measure
Connection Inlet Size1 | N/A 3/4 in |
Connection Outlet Size |
N/A 1/2 in |
Orifice |
N/A 1.6 mm1/16 in |
Maximum Operating Temperature TMO |
N/A 250 ºF |
Cover Material |
N/A Cast Iron – A126, Class B |
Body Material |
N/A Stainless Steel, T304, A240 |
Lever Frame Material |
N/A Stainless Steel, T304, A240 |
Seat Material |
N/A Stainless Steel, T304, A240 |
Float Material |
N/A Stainless Steel, T304, A240 |
Gasket Material |
N/A Non-Asbestos |
Cover Bolt Material |
N/A Carbon Steel – SAE Grade 5 |
Float Arm Material |
N/A Viton |
Orifice Button Material |
N/A Stainless Steel, T303, A276 |
Pivot Pin Material |
N/A Stainless Steel, PH 15-7 MO |
Pin Retainer Material |
N/A Malleable Iron |
Pipe Plug (1/2") Material |
N/A Stainless Steel – T18-8, A276 |
Locator Material |
N/A Stainless Steel – T18-8, A276 |
Weight |
N/A 2.5 kg5 lb |
Air Capacity (Discharge to Atmosphere) at 25 psi (172 kPa) |
N/A 2.5 scfm |
Air Capacity (Discharge to Atmosphere) at 50 psi (345 kPa) |
N/A 4.0 scfm |
Air Capacity (Discharge to Atmosphere) at 75 psi (517 kPa) |
N/A 5.5 scfm |
Air Capacity (Discharge to Atmosphere) at 100 psi (690 kPa) |
N/A 7.1 scfm |
Air Capacity (Discharge to Atmosphere) at 125 psi (862 kPa) |
N/A 8.6 scfm |
Air Capacity (Discharge to Atmosphere) at 150 psi (1034 kPa) |
N/A 10.1 scfm |
- 1 3/4" is standard, for another click on Request Information Button