Model '125SDFI' Suction Diffuser
Designed for direct mounting to end suction of horizontal or vertical pumps.
Available in sizes 2" to 12" with class 125 FF flanged end connections for maximum operating pressures as follows:
PMO: (Maximum Operating Pressure)
200 psig @ 150 deg. F.
Features:
Designed for direct mounting to end suction of horizontal or vertical pumps.
Available in sizes 2" to 12" with class 125 FF flanged end connections for maximum operating pressures as follows:
PMO: (Maximum Operating Pressure)
200 psig @ 150 deg. F.
Features:
- Space Saver - Eliminates the need for typical 'Y' strainer and elbow into pump suction
- Integral strightening vanes reduce flow turbulence
- All sizes supplied with removable 20 mesh screen liner for start-up
Unit of Measure
Inlet Size |
N/A 12 in |
Outlet Size |
N/A 12 in |
A |
N/A 660 mm26 in |
B |
N/A 305 mm12 in |
C1 | N/A 461 mm18 1/8 in |
D |
N/A 305 mm12 in |
E |
N/A 353 mm13 7/8 in |
F |
N/A 25 mm1 in |
G |
N/A 50 mm2 in |
Weight |
N/A 260 kg573 lb |
Maximum Operating Pressure PMO |
N/A 200 psi at 150 ºF |
Maximum Allowable Operating Temperature at Bune-N Seal |
N/A 212 ºF |
Maximum Allowable Operating Temperature at EPDM Seal |
N/A 250 ºF |
Maximum Allowable Operating Temperature at Viton Seal |
N/A 400 ºF |
Body Material |
N/A Cast Iron |
Screen Material |
N/A 304 Stainless Steel |
O-Ring Material |
N/A Buna-N (EPDM or Viton is available upon request) |
- 1 Dimension "C" denotes the distance required for screen removal.