Request Information
  • Drain Trap for Gaseous Systems - CFA Series

    Drain Trap for Gaseous Systems - FAX/FAC Series

    (20)

     FAX/FAC Series - PRODUCT DATA BULLETIN
     FAX/FAC Series - INSTALLATION, OPERATION AND MAINTENANCE MANUAL

    Series 'FAX/FAC' Float Type Drain Trap

    Available in sizes from 3/4" npt to 2" npt for differential pressures up to 150 psig with supply pressures limited to 250 psig at temperatures not to exceed 406 deg. F. and specific gravities down to 0.95.

    Materials of Construction:

    • Body: Cast Iron
    • Cover: Cast Iron
    • Cover Plug: Bronze
    • Mechanism: Stainless Steel
    • Float: Stainless Steel
    • Gasket: Non Asbestos Fibre
    • Cover Bolts: Steel
    Features:
    • All 3/4" and 1" models use a body that is cast with two inlet and two outlet pipe connections that permit four combinations of piping arrangements for many different types of applications

    • Drain Trap for Gaseous Systems - AVDT Series

      Drain Trap for Gaseous Systems - AVDT Series

      (2)

       AVDT Series Drain Trap - PRODUCT DATA BULLETIN
       AVDT Series Drain Trap - INSTALLATION, OPERATION AND MAINTENANCE MANUAL

      Series 'AVDT'

      Available in sizes from 1/2" NPT to 1" npt for operating pressures up to 250 psig gaseous service at temperatures up to 250 deg. F. and specific gravities down to 0.95.

      For installation at the low points of compressed air aftercoolers, separators, storage tanks, filters and compressed air mains to allow for the removal of accumulated condensate.

      AVDT Models are:
      Model AVDT-150: for service pressures up to 150 psig
      Model AVDT-250: for service pressures up to 250 psig

      Features:

      • The cover is fitted with a 1/2" NPT plugged connection. This can be fitted with a full bore ball valve to allow for manual blow down during operation.