CC Series - PRODUCT DATA BULLETIN
CC Series - INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Series 'CC' Condensate Coolers
COLTON condensate coolers offer a unique inlet baffle arrangement designed to enhance flash separation and extend tank life and are usually supplied with a self powered, modulating cooling control, thermometer, internal dispersal manifold and an internal retention weir to save on cooling water. Condensate coolers should be utilized on any application where condensate is being discharged to drain or waste. Most local codes restrict waste water to a 140 deg. F. high limit.
Ordering Information Required:
Pressure of condensate at source steam trap/s or blow down valve/s.
Volume of condensate (usually expressed in lbs/hr.) to be cooled.
Temperature and pressure of cooling water.
High limit of waste condensate (if other than 140 deg. F.)
Items |
/Asset/condensate-cooler-image.jpg CC-6 Condensate Cooler - CC Series |
/Asset/condensate-cooler-image.jpg CC-8 Condensate Cooler - CC Series |
/Asset/condensate-cooler-image.jpg CC-12 Condensate Cooler - CC Series |
/Asset/condensate-cooler-image.jpg CC-16 Condensate Cooler - CC Series |
||||
A | N/A 6 in | N/A 8 in | N/A 12 in | N/A 16 in | ||||
B | N/A 47 in | N/A 48 in | N/A 49 1/2 in | N/A 58 in | ||||
C | N/A 38 in | N/A 39 in | N/A 42 in | N/A 49 in | ||||
D | N/A 24 1/2 in | N/A 26 in | N/A 29 in | N/A 34 in | ||||
E | N/A 9 in | N/A 9 1/2 in | N/A 11 1/2 in | N/A 12 1/2 in | ||||
F | N/A 19 in | N/A 19 1/2 in | N/A 21 in | N/A 24 1/2 in | ||||
G | N/A 0.50 in | N/A 3/4 in | N/A 1 in | N/A 1 in | ||||
H | N/A 2.50 in | N/A 4 in | N/A 5 in | N/A 6 in | ||||
J | N/A 1 1/2 in | N/A 2 in | N/A 2 1/2 in | N/A 3 in | ||||
K | N/A 1 in | N/A 1 in | N/A 1 1/4 in | N/A 1 1/2 in | ||||
L | N/A 8.8 in | N/A 10.8 in | N/A 14.9 in | N/A 18.9 in | ||||
M | N/A 2 1/2 in | N/A 3 1/2 in | N/A 5 in | N/A 5 in | ||||
N | N/A 8 in | N/A 8 1/2 in | N/A 12 in | N/A 13 1/2 in | ||||
O | N/A 13 in | N/A 14 1/2 in | N/A 20 in | N/A 23 1/2 in | ||||
Weight | N/A 80 lb | N/A 110 lb | N/A 175 lb | N/A 225 lb | ||||
Normal Sizing by Condensate Load | N/A up to 2000 lb/hr | N/A up to 5000 lb/hr | N/A up to 10000 lb/hr | N/A up to 20000 lb/hr | ||||
Design Pressure | N/A 25 psig | |||||||
Design Temperature | N/A 100 ºF | |||||||
M.D.M.T. | N/A -20 ºF | |||||||
Hydrostatic Test | N/A 40 psig | |||||||
Design Steam Pressure | N/A 15 psig saturated | |||||||
Operating Steam Pressure | N/A 0 psig (vented to atmosphere) | |||||||
Heat Treatments | N/A None | |||||||
Service | N/A Non-Lethal | |||||||
Material of Construction | N/A Carbon Steel (Optional Stainless Steel) | |||||||
|